BMP_RoundCleanout "Round Cleanout"
|
Floor Drain — A floor drain is
installed in the floor of a structure, mainly designed to remove any standing
water near it. It has gratings that are made of metal or plastic, and a smooth
strainer secured over it.
|
BMP_FloorTrough "Floor Trough"
|
Floor Trough — Supports floor
draining requirements of plumbing sanity design. The bars construct a grating
structure. Water from stub outlet is flowed through bench-mounted, slightly
sloping enclosures containing pots and flooded floor (special sloped concrete
flooring is flooded and drained).
|
BMP_ChannelGrate "Channel Grate"
|
Channel Drain — Trench drain
containing a dominant through- or channel-shaped body and a solid cover
gratings made of metal or plastic used for evacuation of surface water or for
the containment of utility lines or chemical spills. Characterized by its long
length and narrow width, the cross-section of the drain is a function of the
maximum flow volume anticipated from the surrounding surface.
|
BMP_RainWaterOutlet "Floor Mounted"
|
Rain Water Outlet — Drain
system designed to drain excess rain and ground water from flat roofs, as well
as on balconies and parking decks efficient drainage.
|
BMP_ParapetDrain "Parapet"
|
Parapet Drain — Used to set
flush with the roof deck and parapet wall junction. In the event of heavy rain
the evacuation of emergency overflow or when the primary drain becomes clogged,
the parapet drain mounted on the parapet wall handles the drainage. The oblique
grate prevents debris from blocking drainage.
|
BMP_PlanterDrain "Planter"
|
Planter Drain — Used to design
planter drainage systems on balconies, roof tops, and courtyard patios. The
cone structure create an air space around the sides and base of planters. This
allows for fast and efficient drainage by allowing water to drain from all
sides of the planter, eliminating the "corking effect" created by soil fines.
|
BMP_ParkingDrain "Parking Drain"
|
Parking Drain — Parking
lot/deck drains used to protect large open surface areas with large volume
runoffs such as driveways, patios, swimming pools, sidewalks, entries and
parking lots.
|
BMP_FloorDrain4Way "default
|
Floor Drain 4 Way —
Conventional floor drain having 4 ports suitable to gut in more standing water.
|
BMP_FloorDrain5Way "default"
|
Floor Drain 5 Way — A floor
drain having 5 ports.
|
BMP_FloorDrain6Way "default"
|
Floor Drain 6 Way — A floor
drain having 6 ports.
|
BMP_RectangularCatchBasin "Rectangular"
|
Rectangular Catch Basin —
Square grates cased in rectangular body, the catch basin is used in large areas
of surface drainage, installed in the middle of a section of trench drain to
receive debris and redirect waste water.
|
BMP_RoundCatchBasin "Round"
|
Round Catch Basin — Catch
basin with atrium grates stalled in basin adaptor having round riser suitable
openings, suitable to remove waters from downspouts and away from foundations.
|
BMP_GreaseTrap "Grease Trap"
|
Grease Trap — Grease trap is
corrosion-resistant coated fabricated steel with no-hub connections, flow
diffusing baffle, integral trap, and vented inlet flow control device. Used for
removing and retaining grease from wastewater in kitchen and restaurant areas
where food is prepared.
|
